To recap, the cause of the Whirlpool Cabrio dryer F1 error code is a miscommunication between the control board and the rest of the machine. Check for any loose or damaged wires. If no loose or damaged wires are found, replace the control board and this should clear up your problem.

Table of Contents

What does F1 mean on a dryer?

Definition. The “F1” error means that the dryer’s thermistor failed. The dryer is reading the thermistor as “open” and the actual part has shorted out. The thermistor is used to read and control temperatures within the dryer. Without the part, the dryer will not operate.

How do I fix code F01?

The F01 indicates a failed electronic machine control board. This error code can sometimes be caused by a glitch or power surge through the electrical lines. You may be able to clear this code by unplugging the washer for 5 minutes.

What does F1 and e1 mean on a Whirlpool dryer?

A “F1E1” code in the display indicates there may be an issue with the control unit or the associated wiring. Touch POWER, select a cycle, then hold START/PAUSE button to start the dryer. If this is unsuccessful, unplug the dryer.

How do I reset my Whirlpool Duet dryer?

If your Whirlpool dryer displays a “PF” error code, indicating a recent power failure, the dryer will need to be reset and restarted. This is done by pressing “Start” for a few seconds to restart the dryer. If the dryer does not restart automatically, select a new cycle and any options then press “Start” to begin.

What is the capacity of a Whirlpool Duet Sport dryer?

ft. Capacity, 9 Cycles, 5 Temperatures Options, AccelerCare Drying System and Interior Drum Light: White with Grey Accents.

Are Whirlpool dryers safe?

Whirlpool-owned tumble dryer fires. More than 100 Creda, Hotpoint, Indesit, Proline and Swan tumble dryer models (all brands owned by Whirlpool) made between April 2004 and October 2015 could pose a fire risk. The fault in the dryers could lead to fires if excess fluff comes into contact with the heating element.

What does E1 F1 mean on Whirlpool washer?

The Whirlpool Washer F1E1 error means the ACU (main control board) memory is corrupted or another critical ACU failure has occurred. It’s possible that a power surge or a drop in voltage caused the issue. Unplug the washer for 1 minute and plug it back in.

Why does my Whirlpool oven say F1?

F1 – Control Board Failure – Replace control board (clock). F2 – Oven Temperature Is Too High – Check for welded contacts on bake and broil relays. If present, replace control board (clock). For SELF CLEAN models, check door lock operation.

What does F4 E1 mean on a Whirlpool dryer?

Control displaying F4 E1: There may be a problem with the Heater or Heater Relays. Power unit down by turning off the circuit breaker(s) for one (1) minute. Power unit up by turning on the circuit breaker(s). Start a time dry cycle. Monitor the dryer for one (1) minute to ensure the error code does not display again.

Article first time published on

What does F1 mean on Oasis dryer?

The F1 fault code indicates a primary control board failure. Some Kenmore Oasis dryers have a motor control board in addition to the primary control board.

What does E1 mean on a dryer?

“E1” on that model dryer does indicate an open thermistor (solid state temperature sensor) which as you can see below is not that expensive of a part.

Where is the dryer reset button?

Many dryers are equipped with a reset button on the control panel.

What does PF mean on Whirlpool dryer?

A PF (Power Failure) error code indicates that the drying cycle has been interrupted by a power failure. Touch and hold START to restart the dryer cycle or press POWER to clear the display.

How do I turn off the control lock on my Whirlpool dryer?

  1. Locate the “End of Cycle Signal” button. This is located on the right side of the Duet model dryer.
  2. Push the button and hold it down for 3 seconds.
  3. The Control Lock LED should turn off letting you know that your dryer is no longer locked.

Is it worth getting a dryer repaired?

Is it worth repairing a dryer? Dryer repairs are worth it if the appliance is less than 4 years old and the cost is less than $400. For older dryers and/or costly repairs, replacing your appliance is more cost effective.

Where is control lock on Whirlpool dryer?

  1. Locate the “Pause/Cancel” button if the dryer is currently running. …
  2. Locate the “Control Lock” button, which is often located on the right side of the control panel of Whirlpool Duet models.

Is there a recall on Whirlpool dryers?

Whirlpool said it has identified a potential risk with two types of tumble dryers manufactured between April 2004 and September 2018. Potentially faulty machines are sold under the brand names of Creda, Hotpoint, Indesit, Proline and Swan. … You can then use Whirlpool’s online tool to check if your machine is affected.

What Whirlpool models are being recalled?

The company said models WMAQC641PUK, WMAQG741PUK and WMFG741GUK will be added to the recall list, and that it would contact all owners of the machines it is aware of. The model numbers can be found in the recess inside the door or on the back of the appliance.

Are Whirlpool washer dryers being recalled?

Following government intervention, Whirlpool has now agreed to finally recall the up to 800,000 faulty tumble dryers that could catch fire, some four years after safety concerns were first raised.

How do I know if my dryer door switch is bad?

As a safety feature, the dryer will not work with an open door. When the switch is broken, it is unable to tell the control panel the door is shut, so the dryer will not turn on. The only way to tell if the switch is faulty is to take it out of the dryer and test it with a multimeter.

How do I know what size my dryer is?

Calculate the size of the dryer by squaring the radius and multiplying by the depth. For example, if the radius is 1.5 feet and the depth is two feet, the volume is 4.5 cubic feet (1.5 x 1.5 x 2).

How much does a Whirlpool Duet dryer cost?

Like many budget-friendly dryers, the Whirlpool Duet WED72HEDW (MSRP $899) is at its best when using basic, workhorse cycles.

Where is the thermal fuse on a Whirlpool Duet dryer?

Remove the back access panel on the dryer, and look for the exhaust duct near the bottom of the unit. The thermal fuse is either circular or oblong, often white plastic with black material in the center and two wire leads. The thermal fuse is mounted on the exhaust duct.

What does F1 error mean?

F1 Error. The F1 error means that there is an electronics failure within the oven. This failure can occur within the keypad itself, the electronic oven control or the oven temperature sensor. … The error can also indicate data corruption within the oven’s electronic controller.

How do I fix F1 error on Whirlpool oven?

F1 Error Code There may be an analog to digital failure; if this is the case, simply disconnect the range for 30 seconds and plug back in. If the same display reappears, you may need to replace the control board.

How do I clear my Whirlpool f9e0 code?

  1. Power unit down by turning off the circuit breaker(s) for one (1) minute.
  2. Monitor the range or oven for one (1) minute to ensure the error code does not display again.
  3. Verify the range or oven operation.

What does E1 F1 mean?

The F1 E1 alert indicates there is an issue with the appliance control unit or associated wiring. Unplug the washer, wait two minutes, then plug back in.

How do I fix E1 error on my Whirlpool washer?

  1. Check that the water faucets are not closed.
  2. Check that the water pressure in the house is over 20 kPa.
  3. Clean the inlet hose filter screens. Be careful not to remove or disturb the screen placement.
  4. Check that the drain hose is not below 27½” (700 mm) from the floor.

What does PF mean on a dryer?

A PF (Power Failure) error code indicates that the drying cycle has been interrupted by a power failure. Touch and hold START to restart the dryer cycle or press POWER to clear the display.

Why does my dryer Flash PF?

The PF error stands for power failure. It means the dryer encountered a power failure while it was running. … If the error is persistent check the dryer plug at the terminal and make sure the dryer plug prongs are tightened down properly to dryer terminal block and check for any loose wiring at the main control.