Sarking boards are softwood boards that are designed to fit onto roof rafters, providing extra strength to the building structure. Although sarking boards are not a requirement on all buildings, they are commonly used in areas of high rainfall or in environments where torrential rain and high winds are commonplace.

Table of Contents

What is sarking board used for?

Sarking boards are softwood boards that are designed to fit onto roof rafters, providing extra strength to the building structure. Although sarking boards are not a requirement on all buildings, they are commonly used in areas of high rainfall or in environments where torrential rain and high winds are commonplace.

Are sarking boards waterproof?

Permeable sarking board PAVATEX sarking boards can be exposed to the weather for three months, and are “waterproof” according to the European Standard EN 14964 for sarking boards. … ISOROOF sarking board can be used as a vapour permeable, water repellent layer in external walls in timber constructions with clad walls.

Is sarking board breathable?

With superior weather-resistant skin and tongue & groove edge profile, Sarket is perfect for sustainable and breathable roof construction.

What does sarking mean?

Definition of sarking 1 chiefly Scottish : thin boards for sheathing (as under shingles or slates) 2 Scottish : linen shirting.

Does roof need sarking?

Even though sarking is not strictly compulsory, installation is highly recommended by us to prevent and avoid a large number of future problems for your home. Installing sarking protects your roof against bushfires and storms, provides a dust barrier, enhances roof cavity protection, and acts as a vapour barrier.

How much does it cost to install sarking?

How Much Does Roof Sarking Cost? The cost depends on the type of roof sarking you buy, how heavy duty it is and what the thermal rating is. Costs typically range from $2 to $3 per square metre (p/m2). A 60 x 1.35 metre roll will typically cost between $180 to $300.

Do tiled roofs need sarking?

Do you need to sark a tiled roof – well technically no – however in some areas its use is mandated due to the new BAL ratings for bushfire prone areas as well as cyclone prone areas.

Why is roof batten blue?

The reason our product is dyed blue is to distinguish it as meeting the necessary standard: it’s a colour commonly used by Nordic and Baltic suppliers. But it’s the BS5534 grading stamp, not the colour, that’s important.”

Which on a domestic house is sarking used?

Sarking boards are typically softwood boards that are attached to the rafters of a pitched roof, below the roof-covering. They are typically around 150 mm wide and are used to provide additional support and strength to the overall structure.

Article first time published on

Why do you counter batten a roof?

They are used to allow rainwater to pass off the tiles and away from your roof. …

What is a fascia board?

The fascia board is the long wooden board behind the gutters on a house. It connects to the roof rafters, closes off the attic and serves as the mount for gutters. … A damaged fascia can be the starting point for other roof problems and potentially lead to damage to an attic and home.

What is an eave board?

Definition of eaves board : an arris fillet nailed across the rafters at the eaves of a building in order to raise the starter course of slates or tiles.

Do I need sarking for colorbond roof?

When it comes to metal roofs, sarking is considered to be important as it prevents condensation that can cause rusting. … While COLORBOND® steel and ZINCALUME® steel roofing is already thermally efficient, the reflective quality of sarking will further improve thermal performance and keep your house cooler in summer.

How do you install sarking on an existing roof?

  1. Step 1: Purchase High-quality Products. …
  2. Step 2: Get an Accurate Roof Dimension. …
  3. Step 3: Unfasten The Ridge Capping. …
  4. Step 4: Remove The Clips. …
  5. Step 5: Take off The Roof Battens. …
  6. Step 6: Install The Sarking Sheets. …
  7. Step 7: Reassemble The Roof Components.

What is the lining under roof tiles called?

Roofing felt, otherwise known as roofing underlay, sits underneath the tiles or slate on your roof and secures them in place. … It also offers protection against heavy rain as it provides a barrier, allowing rain to run off the roof and preventing it from seeping into the internal spaces of the roof and your home.

How is sarking installed?

Installing sarking is a two-stage process. First the sarking is installed and then battens are laid over the sarking. The battens are important because they provide a layer of air between the roofing and the sarking. Without this layer of air, the sarking would not provide effective insulation.

How much does it cost to replace roof sarking?

Sarking: $8-$10 per square metre. Concrete tiled roofing: $40-$60 per square metre. Steel roofing:$50-$70 per square metre. Terracotta tiled roofing: $80-$110 per square metre.

What is sarking made of?

In modern usage of the term in Australia, sarking refers to a laminated aluminium foil layer, or reflective foil laminate (RFL), that is installed on the roof trusses, beneath the battens, supporting a tile or metal deck roof.

Why is roofing batten red?

JB Red is the branding given to our BS 5534 graded roofing battens, which are coloured red to help identify the batten as graded on site. It is part of the trademark that sets the JB battens apart. … This gives a straight distortion free batten that is light to handle and meets the required moisture content in BS 5534.

How long do roofing battens last?

Most battens are supplied with an industrially applied treatment process designed to provide a 60-year design life under Use Class 2. The relevant Standard is BS 8417:2011 Preservation of Wood.

What are Type A battens?

These Green Treated Battens are Type A and are ideal for a wide range of construction applications. Green wood is freshly cut and will have a high moisture content compared to seasoned timber. The green treated battens are flexible and soft making them a great choice for lathe and chisel work.

Do all houses have sarking?

Also, it is recommended that any tile roof with a pitch lower than 20 degrees should contain sarking. Today, though, many roofers offer sarking with all of their roofs, regardless of the size of it for extra moisture protection and other benefits.

What year did sarking become compulsory?

This installation was the standard practise by builders and carpenters back in 1996, prior and onwards.

What is pitched roof sarking?

Thermoseal reflective foil roof sarking is a non-permeable, vapour barrier to reduce the transmission of moisture into the home and contribute R-Value to the roof system. Recommended for use in warmer climates. … Recommended for use in colder climates.

Should I counter batten?

12 – Counter battens – If you’re using a vapour permeable (breathable) membrane with a close fitting roof covering, such as shingles, then it needs to be counter battened to allow ventilation of the batten space. The position of the first batten should be the batten gauge plus half the thickness of the batten.

What is the distance between roof battens?

Battens should be fixed to rafters set at centres not more than 600mm apart. They should span at least three rafters and be at least 1.2m long.

Do I need Counterbattens?

Counter battens are needed when sarking or plywood boarding is installed directly onto rafters, except in situations where slates are nailed directly into timber sarking. At the eaves, insulation can be pushed up to the underside of the Permo® underlay.

Do you need fascia board?

The Best Fascia Tips You Will Read This Year. The short answer to this question is, “Yes!” They are undoubtedly necessary because they help cap the edges of the rafters, hold gutters in place to help ensure proper water drainage, and more.

What are the boards under the roof called?

Soffit. The boards that enclose the underside of that portion of the roof which extends out beyond the sidewalls of the house.

What is the end of a roof called?

A hipped roof has only two hipped ends. Gable end: The gable end of the roof is the edge of a roof above the gable. Eave: This is where the roof hangs over the edge of the exterior wall.