Chevy Silverado 1500 Oil Viscosity Grade Recommendation According to the owner’s manual for the 2020 Chevy Silverado, SAE 0W-20 engine oil should be used for models outfitted with the 5.3L and 6.2L V8 engines. Models equipped with the 2.7L L4, 4.3L V6, or the 6.6L V8 require SAE 5W-30 engine oil.

Table of Contents

What type of oil does a 2004 Chevy Silverado 2500 take?

Viscosity:10W-30 (Above -18) 5W-30 (All TEMPS) SAE 5W-30 is preferred.Capacity:6 quarts (with filter)After refill check oil level.Torque:18 ft/lbs (Oil Drain Plug)

Can I put 10w30 instead of 5w30?

Most oils will mix perfectly, provided they have a similar synthetic. Therefore, there is no problem in mixing 10w30 and 5w30 since one will be topping up. Mixing the viscosity of oils will not have any effect on the engine. 5w30 and 10w30 engine oils have close viscosity, and thus there is no harm in mixing them.

What oil does a 2004 5.3 Vortec take?

Viscosity:5W-30 (All TEMPS)SAE 5W-30 is preferred.Capacity:6 quarts. . . . (with filter)After refill check oil level.Torque:18 ft/lbs (Oil Drain Plug)

How much oil does a 6.0 Chevy take?

The 6.0 holds 6 quarts of oil 5w-30 conventional oil.

What is SAE 5w30?

5w30 is a motor oil that is widely used in light-duty petrol and diesel engines. Like most motor oils produced today, 5w30 is a multi-grade oil, meaning it ranges from a lower viscosity grade of 5 to a higher viscosity grade of 30.

What kind of oil does a 2004 Duramax take?

Viscosity:15W-40, 10W-30 (Above -18) SAE 15W-40 is preferred. 5W-40 (Below -18) Improves cold starting.Capacity:10 quarts (with filter)After refill check oil level.Torque:13 mm Hex – 18 ft/lbs (Oil Drain Plug) 16 mm Hex – 62 ft/lbs (Oil Drain Plug)

How much oil does a 5.3 Vortec hold?

6 quarts. . . . (with filter)After refill check oil level.

What kind of oil does a 2004 GMC Sierra 1500 take?

All of the 2004 GMC Sierras 1500’s engine options use 6 quarts except for the 4.3l V6. It useS4. 5 quarts. All engines use 5w30 synthetic oil.

What happens if I use 10W40 instead of 5w30?

If you use 10-w-40 instead of 5-w-30 specified by the manufacturer then the viscosity of 10-w-40 used by you will be higher and oil thicker than what is specified during winters. Similarly the oil viscosity will be higher and oil thicker than specified during summers.

Article first time published on

Is it OK to run 10w30 instead of 5w20?

Originally Answered: Can I put 10w30 instead of 5w20? You can, but you will get worse mileage, and in most cases shorten the life of your engine, as it will take longer to pump up pressure for your bearings and lifters, and won’t spray your lower cylinders for an extra second or so on each cold start.

Is SAE 30 the same as 10w30?

SAE 10w30 oil has 10w thickness at low temperatures, but SAE 30 is at high temperatures. … In the straight SAE, 30 doesn’t and can have immense Viscosity and helpless pumpability at low temperatures. As SAE 10w30 is not thick in low temperature, while SAE 30 is in high temperature.

What oil does a 2006 Chevy 2500 6.0 take?

Viscosity:0W-30 (Below -29) 5W-30 (All TEMPS) SAE 5W-30 is preferred.Capacity:6 quarts. . . . (with filter)After refill check oil level.Torque:18 ft/lbs (Oil Drain Plug)

What kind of oil does Chevy recommend?

Chevrolet gasoline engine oil recommendation Dexos1 ™ is the recommended Full Synthetic oil for Chevrolet vehicles with gasoline engines that are either from the 2011 model year or a newer model year. Gasoline engines are among the most common engines for every vehicle brand, including Chevrolet.

Is a 6.0 Chevy a diesel?

General Motor’s 6.0L V-8, or Vortec 6000, was the gas engine option of choice in heavy duty applications that include the 2010 to 2019 Chevrolet Silverado and GMC Sierra 2500/3500. … All 6.0L Vortec engines are mated to GM’s 6L90 automatic transmission.

What oil does a 6.6 Duramax take?

6.6L Duramax Oil Requirements and Recommendations SAE 15W-40 engine oil is preferred in all instances when the ambient temperature is greater than 0° F. SAE 5W-40 engine oil is required in instances when the ambient temperature is less than 0° F.

Can I use 5w40 in my Duramax?

Our answer: Yes, you can certainly use 5W-40 in winter (and summer) in your Duramax. While 15W-40 is suggested as the predominant viscosity for your engine, GM does recommend 5W-40 for temps below -18°C (0°F).

How much oil does a 6.6 LLY Duramax take?

Oil/FluidCapacity – QuartsCapacity – LitersEngine Oil10 Quarts /w Filter9.5 LitersAuto Transmission Fluid7.4 Quarts service refill 12.7 Quarts total capacity7 Liters 12 LitersManual Transmission Fluid6.3 Quarts6 LitersAuto Transfer Case2.0 Quarts1.9 Liters

How do you turn off the change oil light on a Chevy Silverado?

Within five seconds of turning the key, depress the accelerator fully to the floor three times. 3. Watch for the oil light to flash and turn off. If the oil change light does not turn off, turn the key to the off position and retry the process.

How do you reset the check engine light on a Chevy Silverado?

You can reset the check engine light by turning off and on the ignition three times in succession.

Can I use 5W 20 instead of 5w30?

It is not safe to use 5w20 instead of 5w30. 5W20 is thinner and made for colder temperature. If you use 5w20 in warmer temperature instead of 5w30, you may have to deal with more friction and faster engine wear. Eventually your engine performance and longevity will be affected.

What does 10W30 mean?

That’s why you see two numbers on most oils. For Example: 10W30. This means the viscosity is at 10W when the engine is cold and 30 when the engine is hot. Low viscosities are good for cold temperatures (hence the “W” association) because the oil is thinner. Thinner motor oil flows more easily and moves quickly.

Is 5w30 oil synthetic or conventional?

For example, conventional 5W-30 motor oil is a petroleum-based oil that is thick at low temperatures and thin at high temperatures. To change this variance, oil manufacturers use additives to change the oil’s properties, reducing its viscosity at lower temperatures and thickening the oil at higher temperatures.

Is Valvoline good oil?

Valvoline synthetic oil is an excellent oil as it meets the needs of your engine. It also keeps the performance of your engine at its peak. Also, Valvoline synthetic oil does not dissipate in high temperatures and you can enjoy extended drain intervals.

What brand of oil does GMC recommend?

What Brand Of Oil Does GMC Recommend? GMC factory dealer recommends using ACDelco Dexos1 Full Synthetic engine oil for your Sierra 1500. Depending on what engine your Sierra will determine which weight you need to use. For example, the 2,7-Liter turbocharged engine has a recommended oil weight of 0w-30.

How much oil does a GMC 1500 take?

The 2019 GMC Sierra 1500 has a full synthetic oil. The truck’s 2.7L 4-cylinder engine runs on 0W-30 and holds 6 quarts. The 4.3L V6 prefers 5W-30 and also holds 6 quarts. The 5.3L V8 engine and the 6.2L V8 both use 0W-20 and have the capacity for 8 quarts of oil.

What happens if you put too much oil in your car?

When too much oil is added, the level in the oil pan becomes too high. That allows a fast-moving lobed rod called the crankshaft to come into contact with the oil and essentially aerate it. The result is a foamy, frothy substance that cannot properly lubricate the engine.

How many quarts of oil does a 2003 5.3 Vortec take?

SAE 5W-30 is preferred. Capacity: 6 quarts. . . . (with filter)After refill check oil level.

How much oil does a 2006 5.3 Vortec take?

As indicated by factory requirements, the oil capacity specified for the 2006 Chevy Silverado 1500 5.3L v8 iS6 quarts or 5.8 liters.

Is 10W40 good for high mileage?

Mobil 1 High Mileage 10W-40 motor oil is recommended by ExxonMobil for use in high mileage vehicles (even those that have used lower quality conventional oils†), including: Cars.

What is 10W-40 oil used for?

The 10W-40 engine oil has a thicker viscosity than, say, 10W-30 oil when the car engine is hot. This helps it lubricate older moving parts in high mileage engines while being less likely to leak.